With more than 18 years experiences in optical communiation field,3V TECHNOLOGY is a world-service expert for fiber optic solutions.Our products are high-quality & eco-friendly with the best quality materials and the most perfect process manufacturing, all will compliant with Rohs&Reach2.0,andIEC standards.
3V TECHNOLOGY specializes in high-level fiber optic components,LC attenuation loopback;MPO attenuation loopback;MPO patch cord;MTP patch cable and other MPO/MTP sub-assembly.special fiber array,fiber pigtail and collimtors; Relying on our these years experience accumulation,we also design and develop according to clients' special requirements.
MPO series pre termination refers to the end of the fiber sector MPO single head 8/12/24 cores connector, and the other end is assembled with LC/SC/FC connector specified. It is mainly used in the pre terminal module box,connecting terminal jumper,pre trunk optical cable and equipment, to achieve modular, plug and play, compared with the traditional welding, which greatly improves the convenience and efficiency of work
Product features:
1,High Performance in IL & RL
2,AVailable in 2,4,8,.12.24 fiber.....
3,Precise dimension
4,100% in-house tested
5,The choice of the supports higher speed Ethernet and Fibre Channel applications(OM3, 0M4 and OS1/OS2 fibers), and applications with legacy multimode fiber(OM1 or OM2)
6,MPO Male (with guide pins) assembled with 0. 9mm cable to single-fiber connectors . ll types of single-fiber connector interface available for choices (SC, LC, E2000,MTRJ, etc.)
7,The MPO connector with the guide pin through the MPO port of the module box and the backbone optical cable butt joint, the other end of the LC or SC connector through the module box LC panel or SC panel and the equipment of the jumper.
8,Custom jumper length can be matched with the module box, easy to disk.
9,MPO type fiber optic patch cord adopts array technology, and can output multi-path light on a small output surface at one end. The conventional output circuit number is 2, 4, 8, and 12 cores, and the pigtail fiber is in the form of ribbon fiber, and the multi-core surface is high. Accurate positioning pins allow precise alignment of multiple fibers while reducing installation time and cost.
10,Three-ring ferrules have high reliability and good stability. Good coaxiality and dimensional accuracy.
11,Adopting new environmentally friendly PVC material, it has strong tensile strength and low carbon environmental protection.
12,High-tech grinding technology and grinding equipment, fiber recesses, ceramic end face radius of curvature technical parameters meet the standard.
13,Using high-quality materials and excellent production technology, the joints can be inserted in a high number of times, and the insertion loss variation is <0.30DB interchangeability.
MPO/MTP connector
(US Conec or SENKO) |
Fiber Type |
Single-mode |
Multi-mode |
| Core counts |
2,4,8,12,24 or customize |
| Male/Female |
male head,needle mother,no needle |
| Endface Angle(degree) |
0,8 or customize |
| Insertion Loss |
Typical(dB) |
0.35 |
0.35 |
| Max.(dB) |
0.75 |
0.6 |
| Return Loss(dB) |
≥60(APC) |
≥20(PC) |
| ≥50(PC) |
| Durability (dB) |
≤0.2 200 times docking |
| working temperature(℃) |
-40～+85 |
| Test wavelength(m) |
1310 |
850 |
| Optional MTP Brand:US Conec or SENKO |
LC/SC/FC connector
(or customize) |
Fiber Type |
Single-mode |
Multi-mode |
| Connector type |
PC |
APC |
PC |
| Insertion Loss(dB) |
≤0.3 |
| Return Loss(dB) |
≥50 |
≥60 |
≥35 |
| Durability (dB) |
≤0.2 200 times docking |
| working temp.(℃) |
-40～+85 |
| Test wavelength(m) |
1310 |
850 |
| Customization Optional |
1,Hermatically sealed feedthrough is available
2,Fiber type/Fiber length can be specified by clients |
Applicaiton:
1,High-density fiber networking system
2,High-integration equipment/components
3, High-precision communication devices
4, QSFP moudle
